Hi,
There's been a request for a read-only announcements list for
BitFolk, so I have decided to try this out.
I've created the "announce" list:
https://lists.bitfolk.com/mailman/listinfo/announce
In future any sort of announcement that I would normally send to the
"users" list will instead be directed to "announce", and
automatically copied to the "users" list.
The "announce" list will not accept any discussion, and posts
sent through it will have Reply-To set to the "users" list.
Therefore if you're happy with the content and level of traffic on
the "users" list you need not do anything, as all announcements will
continue to end up there.
If on the other hand you would prefer to only see announcements from
BitFolk and not any user issues, following comments or debate, you
may wish to subscribe to "announce" and remove yourself from
"users".
Cheers,
Andy
--
http://bitfolk.com/ -- No-nonsense VPS hosting
Hello,
As customers who use a larger amount of bandwidth will be aware, the
predictive data transfer warnings we offer have had a tendency to
rapidly cycle between "warning" and "recovery" state just after the
reporting period starts.
This was reported here:
https://tools.bitfolk.com/redmine/issues/15
I'm happy to report that I believe this issue is now fixed.
As a reminder you can manage your data transfer warning settings
here:
https://panel.bitfolk.com/xfer/
including switching between predictive or "percentage used"
warnings, or disabling warnings entirely.
Cheers,
Andy
--
http://bitfolk.com/ -- No-nonsense VPS hosting
Hello,
On Sun, Dec 26, 2010 at 11:30:39PM +0000, Andy Smith wrote:
> On Sun, Dec 26, 2010 at 02:00:16PM +0000, Andy Bennett wrote:
> > Assumptions:
> > + Most customers will want 1 Linux partition and 1 swap partition.
[...]
> I think you are right that it will be best to just do one partition
> per block device. This will still leave it possible to resize
> easily and it will make all the installers happy.
To make this transition less painful I have added a "disks" command
to the Xen Shell. As described here:
https://tools.bitfolk.com/redmine/issues/51
it will enable you to divide your allocated disk space between as
many disk devices as you like.
It will also allow you to reset your exported disks to conform to
the standard described above, without you having to ask support to
do it for you.
You don't need to do that until/unless you want to reinstall your
VPS of course, but most of you will need to do it if you do want to
use one of the installers.
I've also added the CentOS 5.x installer, so now the available
installers are:
Debian
- lenny (5.x)
- squeeze (6.x)
Ubuntu
- Lucid (10.04.x LTS)
Centos
- 5.x
Gentoo doesn't have an installer as such, but installing Gentoo from
an existing Linux installation is a fairly normal way to do it, do
that can be done from the rescue environment:
http://www.gentoo.org/doc/en/altinstall.xml#doc_chap5
Now that these installers are available we aren't going to be doing
any reimaging for customers anymore, as long as you're wanting a
distribution that actually has an installer. Supported distributions
that don't currently have an installer:
- Debian sid
- Ubuntu Maverick (10.10)
They will be added at a later date.
Naturally if you have any problems using any of this please do open
a support ticket.
Cheers,
Andy
--
http://bitfolk.com/ -- No-nonsense VPS hosting
"Xandros's low-level support for the Eee mostly seemed to consist of a pile of
shell scripts made of cheese and failure." -- Matthew Garrett
Testing 1 2 3
--
http://bitfolk.com/ -- No-nonsense VPS hosting
* MurkyGoth sends an email to Channel 5 suggesting a reality TV show with GWB, Ging and Robert
<spb> Three Men in a Failboat