[bitfolk] Remaining 32-bit PV guests will be switched to pvshim on Tuesday 18 January

Hi, TL;DR: The ~30% of you still running 32-bit PV guests are going to have your config changed in a month. We've tested that on many different configurations and haven't had a problem yet but it's always possible something could go wrong, and if so you'll only find out at the next boot. If affected we recommend you instead make the change yourself at a time convenient to you. This email is only relevant to you if you're still running in 32-bit PV mode. Most customers run 64-bit. If you type "uname -m" in your VM then it will say "amd64" for 64-bit and "i686" for 32-bit. It also says it on the summary page of: https://panel.bitfolk.com/account/ You can stop reading if you're already running as 64-bit, or in PVH mode. We haven't got a simple way to check if you are PVH mode because the intention is that eventually will be a detail you don't have to care about (all VMs will be PVH and that has been the default for over a year now). You can for now log in to the Xen Shell and type "virtmode" and it will tell you. So if that says "PVH" you can also stop reading. For several years now we have been trying to encourage customers running 32-bit PV mode guests to switch to 64-bit and / or PVH mode. There are many reasons for this but the most pressing one is that it's not possible to fully protect 32-bit PV guests against the various already known speculation attacks (nor probably new ones that will be discovered). About 30% of the customer base still runs 32-bit PV mode guests even though the default has been 64-bit since about 2012. We are clearly not going to be able to force everyone to switch in a timely manner so we have been testing a different way of running legacy 32-bit PV mode guests. That testing has gone well - there haven't been any issues - so we're going to convert all remaining 32-bit PV mode guests to that configuration on Tuesday 18 January 2022. Since it's not possible to test every permutation of installed guest though, we can't rule out there being a problem, and that problem will only manifest at your next boot. If you'd like to make the config change ahead of time here is how: 1. Log in to your Xen Shell. More info: https://tools.bitfolk.com/wiki/Xen_Shell 2. Make sure the version in the "help" command is at least this: xen-shell> help xen-shell v1.48bitfolk66 The Xen Shell stays running after you disconnect so it is possible to be running an older version. If it is older, "exit" out of every window until it logs you out, then log in again. 3. Use the "arch" and "virtmode" commands to confirm that you are currently running in 32-bit PV mode: xen-shell> arch Your current install architecture is: i686 xen-shell> virtmode Your current virtualisation mode is: PV 4. Use the "arch i686" command to force a switch to i686 (32-bit) architecture again. This will update your config to use pvshim. 5. Use the "shutdown" command to shut your guest down. 6. Use the "boot" command to boot it again. It should boot pretty much the same as before. If it does not, then you will likely not be able to get it to boot again yourself and will need to put in a support ticket. This change will be made for all remaining 32-bit PV mode guests on Tuesday 18 January, without further testing, as that would involve forcible reboot. If you do want to take some action about this here are some things you could do, in order of best choices to worst choices: a) Ask for a new "migration VPS" which would be an empty account that you can do a new install into (which would be 64-bit PVH as that's the default): https://tools.bitfolk.com/wiki/Migrating_to_a_new_VPS b) Upgrade your kernel past 4.19.0 and make sure you're running grub-pc (not legacy Grub) as bootloader, with a /boot/grub/grub.cfg file, then switch to PVH mode. c) If running at least Debian 7 (wheezy) or comparable age Ubuntu you can install an amd64 (64-bit) kernel even while everything else is 32-bit. That turns your VM into a 64-bit PV guest. Follow these CrossGrading instructions only as far as installing and booting into the new kernel: https://wiki.debian.org/CrossGrading d) Do nothing and let us switch you to using pvshim. Your guest is still insecure and running with reduced performance compared to 64-bit but this only then affects you. Cheers, Andy -- https://bitfolk.com/ -- No-nonsense VPS hosting _______________________________________________ announce mailing list announce(a)lists.bitfolk.com https://lists.bitfolk.com/mailman/listinfo/announce