6 May
2022
6 May
'22
7:39 p.m.
Hi,
At the moment transfers only happen from
a.authns.bitfolk.com and
those addresses haven't changed, but if you want to add them all
there is no harm.
$ for h in a b c; do host ${h}.authns.bitfolk.com; done
a.authns.bitfolk.com has address 85.119.80.222
a.authns.bitfolk.com has IPv6 address 2001:ba8:1f1:f085::53
b.authns.bitfolk.com has address 45.33.107.124
b.authns.bitfolk.com has IPv6 address 2600:3c01:e000:259::53
c.authns.bitfolk.com has address 172.104.29.216
c.authns.bitfolk.com has IPv6 address 2600:3c03:e000:432::53
Thanks Andy!
It looks like I had incorrect v4 and v6 addresses for both b. and c. in my
bind acl. I also had an old v6 entry for a. and an even older pair of
addresses for c. that had been commented out and annotate with "Expires
19th March 2012" so I guess I have the addresses from approximately that
era.
Is it possible (and if so, advisable) to use hostnames in the ACLs?
Otherwise, what's the best way to keep this information up-to-date?
Best wishes,
@ndy
--
andyjpb(a)ashurst.eu.org
http://www.ashurst.eu.org/
0x7EBA75FF