[bitfolk] Re: 2024-05-23 ~20:25Z – ~20:50Z: Networking issue on host "jack"

On Sat 25 May 2024 09:22:08 GMT, Andy Smith via BitFolk Users wrote: I’m pretty sure it would have, it’s the whole purpose of active checks. nas-hp ~ # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v6.6.16-gentoo-dist Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer3+4 (1) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Peer Notification Delay (ms): 0 802.3ad info LACP active: on LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable System priority: 65535 System MAC address: 66:44:af:1d:d5:9b Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 Actor Key: 9 Partner Key: 1076 Partner Mac Address: c0:4a:00:e4:09:a0 Slave Interface: eno1 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: a0:1d:48:c7:a3:08 Slave queue ID: 0 Aggregator ID: 1 Actor Churn State: none Partner Churn State: none Actor Churned Count: 0 Partner Churned Count: 0 details actor lacp pdu: system priority: 65535 system mac address: 66:44:af:1d:d5:9b port key: 9 port priority: 255 port number: 1 port state: 61 details partner lacp pdu: system priority: 32768 system mac address: c0:4a:00:e4:09:a0 oper key: 1076 port priority: 32768 port number: 2 port state: 60 Slave Interface: eno2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: a0:1d:48:c7:a3:09 Slave queue ID: 0 Aggregator ID: 1 Actor Churn State: none Partner Churn State: none Actor Churned Count: 0 Partner Churned Count: 0 details actor lacp pdu: system priority: 65535 system mac address: 66:44:af:1d:d5:9b port key: 9 port priority: 255 port number: 2 port state: 61 details partner lacp pdu: system priority: 32768 system mac address: c0:4a:00:e4:09:a0 oper key: 1076 port priority: 32768 port number: 1 port state: 60 -- Alarig